The Startabox® System is a quick and safe way of achieving high quality reinforcement connections in a structural concrete joint without formwork damage. It consists of specially selected high yield reinforcement steel conforming to BS4449 housed in a perforated case with a tear-off plastic cover which protects the reinforcement until it is required for use.

Speed Startabox® is quickly nailed into the formwork. There is no need for time-consuming drilling and cutting of the formwork. The formwork can be easily struck and re-erected thereby reducing intervals between pours.

Safe The steel starter bars are housed within their case until ready for use. There are no protruding bars which may corrode or become damaged and present a hazard to workmen.

Cost The formwork suffers no damage and therefore may be re-used many times. This contrasts with normal stop-ends which only offer one use.

Quality Traditional stop-ends offer suffer grout loss. Startabox® is nailed to plain formwork and does not suffer the same problem. This means that Startabox® will deliver a high quality construction joint every time.

Site ‘Take off’ and scheduling service available.

Make an enquiry Email this item Print this page

Related Products:

N.B. The Type 11 case with 16mm bars is produced with single bars only. Cases containing 8, 10 and 12mm bars supplied 30mm deep. Cases containing 16mm bar supplied 50mm deep with steel lids for greater rigidity.

Re-bending tools available from stock. 8-10mm bar, order re-bending tool 1. For 12 to 16mm bar, order re-bending tool 2.